Scott:
Yep. And you even get that "digital" sounding carrier at no extra charge.
(per QST review). Then throw in the 930's auto-tuner and built in power
supply to help even things up a bit. True. The potential is there for
more radio for the buck but please clean up the cw notes on these newer
rigs.
N4LQ
Loves Tritons, Omni D's, Delta's and Corsairs. Clean machines.
DSP = (Digital Sounding Processors)
-----Original Message-----
From: "Ten-Tec Inc. Amateur Radio Sales" <sales@tentec.com>
To: tentec@contesting.com
To: <tentec@contesting.com>
Date: Thu, 23 May 2002 15:10:25 -0400
Subject: Re: [TenTec] Annotation to prices in perspective
>
> >N9DG wrote:
> > > With the increasing use of DSP in our gear we should
> > > theoretically be able to ride the wave of Moore's law
> > > to some degree.
> > >
> > > Duane
> > > N9DG
>
> There's been discussion of comparing top of the line rig prices
> in real dollars now vs. then, but relatively little discussion of some
> of the performance issues vs. price for older vs. newer.
>
> What was acceptable as top of the line receiver performance in
> the early and mid-1980's is now either mid-range or even sub-mid
> range for today's gear! Have a look at the ARRL Product Review
> for the Kenwood TS930S on the ARRL web site. At 14 MHz,
> the receiver specs for the '930 and our Ten-Tec Jupiter are
> very close to identical. MDS is a -4 dBm difference. Two tone
> third order dynamic range at 20 kHz spacing is 1.5 dB apart.
> The Jupiter comes out significantly ahead on third order intercept.
>
> This is where the benefits of DSP are clear - more radio performance
> for less dollars spent than in years past.
>
> The bar for 'top of the line' keeps getting higher every year, but
> the value of what you get for the dollar for ham gear increases as
> well, whether it's from us or from some of the rigs the Japanese
> are building at present.
>
> Scott Robbins, W4PA
> Amateur Radio Product Manager, Ten-Tec
>
>
>
> -----------------------------------------------------------------
> Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
> Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
> Repair (865) 428-0364 8-4. Sales (800) 833-7373 9 am-5:30 pm.
> Fax (865) 428-4483 24 hrs. Visit us at <http://www.tentec.com>
>
> --->--->---> Please note: E-mail <sales@tentec.com> for sales
> and general product info only. We presently do not offer
> repair, parts, or kit building tech support by electronic mail,
> please telephone (865) 428-0364 or (865) 453-7172.
>
> Ten-Tec manufactures amateur radio equipment, military and com-
> mercial use HF radio equipment, custom aluminum and steel
> enclosures and has an on-premises, fully equipped tool and die
> facility supplying metal and plastic injection mold industries.
> Potential tool and die, custom enclosure or communications
> electronics customer? Contact us with your needs.
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|