As Usual, Carl comes through again . . . dug around in the junk box and
found that old null modem adapter (wonder what I ever used THAT for) and
BAM! Omni V came up running . . . wonder list, this is . . . Thanks again
Carl, and those others who answered . . .
73 de Rick, WQ8Q
----- Original Message -----
From: "Carl Moreschi" <n4py@earthlink.net>
To: "TenTec" <TenTec@contesting.com>
Sent: Sunday, March 31, 2002 10:18 AM
Subject: Re: [TenTec] Omni V Interfacing
> Rick,
>
> Watch out for the rxd and txd lines. You need a null modem
> cable to reverse these two lines for the Omni V. Remember,
> TXD out of the PC goes to RXD in the omni V and viceversa.
>
> Also, make sure you are set at 1200 baud.
>
> Carl Moreschi N4PY
> Franklinton, NC
> ----- Original Message -----
> From: "Rick Tyler" <rp.tyler@worldnet.att.net>
> To: "TenTec" <TenTec@contesting.com>
> Sent: Sunday, March 31, 2002 3:59 PM
> Subject: [TenTec] Omni V Interfacing
>
>
> > I've got a newly acquired Omni V and I know the computer interfacing is
> not
> > quite up to today's standards . . . I also know that N4PY Carl's V.9
> > upgrades the interface to modern times . . . however, I haven't yet
> > performed that modification (the chips are in the mail to me right now)
> but
> > thought I'd like to get the OMNI V up and running on SOME kind of
program
> > just to make sure the port works . . . I figured that I ought to see if
> > everything works okay before diving into cutting traces, etc.
> >
> > There are only a couple of programs I've found that will support the
> OmniV:
> > Writelog (of which I'm a registered user, and have used it with yaesu
and
> > Pegasus rigs) and win-eqf, of which I downloaded a trial copy just to
see
> if
> > I can get the Omni V sending/receiving data . . .
> >
> > So far, no luck . . . any help would be greatly appreciated.
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|