Eric:
I just took a common DB25 switchbox that you can buy at any
computer store and removed the rotary switch and wired the
connectors in parallel. It's easy to do and works great.
Greg, K7KJ
Portland, OR
----- Original Message -----
From: "Eric Rosenberg" <wd3q@erols.com>
To: <tentec@contesting.com>
Sent: Friday, March 08, 2002 7:40 AM
Subject: [TenTec] Break-out or Band Decoder Box?
>
> My computer drives my Omni-6 Plus, Herc II and 301.
>
> At the moment, I have a single cable that strings them all together.
> For the sake of my sanity, I'd like to replace it with a box
> that takes that single serial cable from the computer and then
> breaks it out into three or four (should I get lucky/wealthy
> and find/purhase the TT auto tuner).
>
> No change in signal levels or anything else, just sending that
> one RS-232 line from the computer to four different devices.
>
>
> Does such a box exist, or will I have to fabricate one (AARGH!).
>
> Thanks in advance,
>
> Eric W3DQ
> Washington, DC
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|