TenTec
[Top] [All Lists]

[TenTec] Fw: RS-35 in an RF environment

To: <tentec@contesting.com>
Subject: [TenTec] Fw: RS-35 in an RF environment
From: N4NT@chartertn.net (Mike Hyder)
Date: Tue, 20 Nov 2001 19:01:35 -0500
Straight from the horse's mouth. . .

Mike N4NT

----- Original Message -----
From: "ASTRON" <sales@astroncorp.com>
To: "Mike Hyder" <N4NT@chartertn.net>
Sent: Tuesday, November 20, 2001 6:06 PM
Subject: Re: RS-35 in an RF environment


> MIKE. 1ST CHECK YOUR AC OUTLET GROUND IT MUST HAVE GOOD CONNECTION
> 2ND. MEASURE FROM THE -13.8V TERMINAL TO CHASSIS , IF NO DIRECT
CONNECTION,
> RUN A PIECE OF WIRE FROM -13.8V TERMINAL TO CHASSIS.
> JANE
> ----- Original Message -----
> From: Mike Hyder <N4NT@chartertn.net>
> To: <eastron@astroncorp.com>
> Sent: Tuesday, November 13, 2001 7:56 AM
> Subject: RS-35 in an RF environment
>
>
> > Several people have advised me that Astron had a service bulletin for
the
> > Astron RS-35 (and possibly other models) which advised to strap the
> negative
> > post of the supply to the cabinet to reduce or eliminate problems caused
> > when RF energy affects the supply's regulation.  This is in particular a
> > frequent problem in the amateur radio service.
> >
> > Could you confirm such bulletin and either email it to me or point me to
> the
> > URL that will allow me to view it, please?
> >
> > Many thanks,
> > Mike Hyder
> >
> >
> >
> >
>
>


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Fw: RS-35 in an RF environment, Mike Hyder <=