Jeff, the wire will short out that position. A capacitor needs to be there.
No connection is a good capacitor. You need to remove the wire.
The capacitor you add needs to be high voltage if you are running
any power. You can get a capacitor from Ten Tec.
Jim W7ANF
----- Original Message -----
From: "Jeff Davis" <n9avg@home.com>
To: <tentec@contesting.com>
Sent: Sunday, November 18, 2001 6:51 AM
Subject: [TenTec] 238 Tuner Question
> I picked up a 238 tuner at a hamfest this weekend. It did not have the
> external (extra) capcitor with it. There is a wire installed between the
> ground terminal and the external capacitor connector on the back. Without
> the manual I have no idea if this should be there or not? Can anyone
advise?
>
> I will order a manual and the missing parts but just wondering if this
> normal?
>
> 73 de Jeff, N9AVG
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|