--part1_8a.bfbb8ee.28c3f016_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Hello again,
thanks again for all the replies of my last question.
This is a fantastic reflector.
After testing the Paragon side by side with my OMNI 6+
I noticed much more filter blow by on the PARAGON RX.
I have 500 and 250 Hz filter in the Paragon and 2 times
500 and 250 Hz filters in the OMNI 6+.(both IF)
I know in the Paragon the cw-filters only in the 2. IF.
On the Paragon I can here the signals mostly 3 Khz up again, or when listen
to a pile up with split operation I can
hear the stations calling up 1 or 1,5 khz a little on the qrg
of the DX-station.
I there so much difference beetween an OMNI and a PARAGON in filter blow by?
The filter blow by seemed to be more on the 250 HZ filter
on the PARAGON.
Did not try the OMNI 6+ filters(2. IF) in the Paragon yet.
Using in both the stock TenTec filters, no INRAD filters.
73 de Harry, DK2GZ
--part1_8a.bfbb8ee.28c3f016_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>Hello again,
<BR>
<BR>thanks again for all the replies of my last question.
<BR>This is a fantastic reflector.
<BR>
<BR>After testing the Paragon side by side with my OMNI 6+
<BR>I noticed much more filter blow by on the PARAGON RX.
<BR>
<BR>I have 500 and 250 Hz filter in the Paragon and 2 times
<BR>500 and 250 Hz filters in the OMNI 6+.(both IF)
<BR>
<BR>I know in the Paragon the cw-filters only in the 2. IF.
<BR>
<BR>On the Paragon I can here the signals mostly 3 Khz up again, or when listen
<BR>to a pile up with split operation I can
<BR>hear the stations calling up 1 or 1,5 khz a little on the qrg
<BR>of the DX-station.
<BR>
<BR>
<BR>I there so much difference beetween an OMNI and a PARAGON in filter blow by?
<BR>The filter blow by seemed to be more on the 250 HZ filter
<BR>on the PARAGON.
<BR>
<BR>Did not try the OMNI 6+ filters(2. IF) in the Paragon yet.
<BR>
<BR>Using in both the stock TenTec filters, no INRAD filters.
<BR>
<BR>73 de Harry, DK2GZ</FONT></HTML>
--part1_8a.bfbb8ee.28c3f016_boundary--
|