I run a hard ground from the rig, the tuner, the amp to the Tentec PSU.
No problems here.
Oh yes, #10 AWG LCOF wire with lugs crimped AND soldered.
73
Bob K4TAX
Sam Bridges wrote:
>
> Hello Gang: My One cent is: Whenever I have had a problem with the supply
> it has been due to a flaky ground;viz, lug nut not tight or nuts not tight
> on BOTH sides of the chassis. This occurred to me when I first turned on my
> Omni 6+ and 962. IT shut down on me for no reason I could think of at the
> time. Then I started looking at my ground connections; particularly the
> main on at the Heathkit 2060 tuner. All those wires at one point were not
> tight enough. I have had no trouble since 1999!
> My second cent: Has anyone got a suggestion for a cassette recorder or
> other device to hook up to the Omni 6+ to make tapes of W1AW, great QSOs,
> or documentation for the FCC? If you have done this,let me know how and
> with what.
> 73s de KJ4ZM Sam
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/tentec
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|