I don't think that Tentec uses a LOG taper pot for the RX audio. If
they did I don't think the volume would reach loud porportions in the
first 90 degrees of rotation.
At least that's the way my Omni VI+ works.
73
Bob K4TAX
Carl Hyde wrote:
>
> My Triton IV does the same thing. I can vary the audio volume but it is
> extremely loud with the internal or external speaker. I have it about 1 notch
> above off. I run the audio through a home built Motorola DSP unit and I had to
> put a 40 DB pad on the input. I thought it was normal because I have used
> several other Triton's and they all exhibited this characteristic.
> --- NZ8J <timcook@erinet.com> wrote:
> >
> > Just picked up a very nice Triton IV, but there is one thing I wonder if
> > anyone has run across. Even with the audio gain all the way down, the audio
> > is still quite loud from the radio, the only way to completely shut it down
> > is to turn the RF gain down. With the audio gain at 9 o'clock, the volume is
> > way too loud....and at full CW it is unbelieveably loud..
> > thanks
> > Tim
> > NZ8J
> >
> >
> > --
> > FAQ on WWW: http://www.contesting.com/FAQ/tentec
> > Submissions: tentec@contesting.com
> > Administrative requests: tentec-REQUEST@contesting.com
> > Problems: owner-tentec@contesting.com
> >
>
> =====
> Carl H.
> Remember, the opposite of PROGRESS is CONGRESS
>
> __________________________________________________
> Get personalized email addresses from Yahoo! Mail - only $35
> a year! http://personal.mail.yahoo.com/
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/tentec
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|