TenTec
[Top] [All Lists]

[TenTec] TT Scout on batteries?

To: <tentec@contesting.com>
Subject: [TenTec] TT Scout on batteries?
From: w5yr@att.net (George, W5YR)
Date: Fri, 08 Dec 2000 23:41:02 -0600
Why not augment the gel cell with one or two akaline D cells in series?
They are rated at about 17 ah and would raise the terminal voltage to
the radio enough to ensure an adequate supply.

72/73, George   W5YR - the Yellow Rose of Texas      NETXQRP 6         
Fairview, TX   30 mi NE Dallas in Collin county      QRP-L 1373
Amateur Radio W5YR, in the 55th year and it just keeps getting better!
Icom IC-756 PRO #02121 (9/00) Kachina #91900556 (12/99) IC-765 (6/90)


W7TRX wrote:
> 
> Greetings,
> 
> I am planning a portable radio setup for some outdoor fun. I have a 5w solar
> panel and 14ah gel cell for power. I plan to use SSB only. The TT Scout at
> first glance looks like a good radio for this use. The RX current
> requirements are OK with some mods to lower this a bit.
> 
> I did a Deja search and saw a number of posts regarding running the Scout on
> battery power. The word is, it needs a minimum of 12.8 volts for the voltage
> regulator to operate properly. 12 VDC and you will have problems. This would
> seem to make battery use unpractical. I am not entirely clear was the
> resulting symptoms are, but it was mentioned enough to cause concern. This
> seems to be unrelated to the known frequency drift/correction problem that
> occurs during  long strings of CW.
> 
> I was hoping someone in this group could shed some additional light on this
> for me.
> 
> Thanks for the help,
> 
> 73, Tracy
> W7TRX

--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>