More output, more heat, and a dicey overload trip circuit. Don't let
the load Z go much below 35 ohms or current will go out the roof, at
least to 22 amps before the PSU trips off. If you are not using a
Tentec supply, say a 35 to 45 amp ASTRON, buy PA transistors.
73
nw4p@martha.xtn.net wrote:
>
> Gentlemen,
> The Omni 6+ says 12-15 VDC usage. What is the effect on the radio,
> if the voltage is increased to the max of 15 VDC? Just wondering!!
> 73 Richard NW4P
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|