Someone was looking for this a while ago...
73, de ke5c, op john
----- Original Message -----
From: "don" <dwittlic@apci.net>
Newsgroups: rec.radio.swap
Sent: Wednesday, August 23, 2000 3:06 AM
Subject: FS: Ten-Tec Omni Noise Blanker model 248
> Rare Ten-Tec Model 248 noise blanker module for Omni. Old
> stock but unused.
> (probably for model A and B, please check your radio's
> documentation to be sure ). Active devices on the module
> include 6 transistors, a chip and a crystal filter.
>
> This module plugs into the existing pair of sockets of an
> Omni having 9 MHz IF. Installation consists of cutting an
> existing green wire and plugging in this unit. I include
> the installation instruction sheet (pt 74087 dated 4-79)
> with schematic, voltage test chart, operation / theory.
> The warranty policy sheet is included, but is not
> current. You will need to provide your own mounting
> screws and the piece of insulating paper that lies between
> the module and the chassis.
>
> Best offer over $30
>
> Shipping by US Mail Priority to your US address is included
> in price.
>
> I do not have an Omni to test this on. If you buy it, but
> are not satisfied with its operation, let me know within 5
> days of receipt and we will arrange for a return and refund.
>
> Don WN9V
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|