TenTec
[Top] [All Lists]

[TenTec] OMNI-5 Problem

To: <tentec@contesting.com>
Subject: [TenTec] OMNI-5 Problem
From: n1eu@hotmail.com (Barry N1EU)
Date: Mon, 31 Jul 2000 12:57:57 EDT
Could be rf getting in Lee.  Suggest you remove all cables connected to the 
Omni V that aren't essential and then try 160M xmsn with a dummy load and 
also into the dipole with reduced power out and see if it still hangs in 
transmit.

Your shack just might be very live with rf on 160m, especially if transmit 
antenna is nearby.

If reducing power or the dummy load cures the hanging, you can try adding 
some ferrite to the Omni V cables, but it might be hard to exorcise the rf 
demons if you're on the second floor and the dipole is nearby.

GL,
Barry  N1EU

>Hi...I have an Omni-5.  On 160 meters it goes into oscillation...just takes
>off on its own...in transmit, SSB and CW.  Using the 705 mike.  Tried
>changing, no luck.  Using the 961 PS.  Using a dipole for 160.  Tried a
>tuner.  Tried the TT counterpoise ground (I'm on the second story, away 
>from
>good ground).  No luck.  Any ideas?  Thanx, Lee K7INU.
>
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>