To All;
I've used it professionally and it works great. Other companies like
Hewlett Packard, Tektronics and Sony as well as others use it in their
service and production operations.
A word of caution. If you think a little does a little bit of good and
therefore a lot should be better ...... best think again. Use it ONLY
like the manufacturer suggests. Least is best.
73
Bob K4TAX
Ten-Tec Inc Amateur Radio Sales wrote:
>
> Several requests were sent to us over the weekend about obtaining
> DeoxIT DN5. Caig Laboratories (the manufacturer of DeoxIT) has
> distributors nationwide - they can be reached by telephone at (800)
> 224-4123 from 8 am - 4 pm Pacific or via email at caig123@caig.com.
> Their website at http://www.caig.com also has extensive information
> on DeoxIT and a host of other related products that they manufacture.
>
> Scott Robbins, W4PA
>
> >Generally, when a rig is here for trade-in or service and acting flaky due
> >to a possible power supply issue, one of the first things our techs will do
> >is clean out the power supply connectors on the end of the PS cable
> >and/or the one panel mounted inside the radio. It's amazing how many
> >radios will spring back to from life from "dead" or erratic just by doing
> >this. We use DeoxIT DN5 spray cleaner for this purpose - it's not
> >cheap but it works great.
> >
> >Scott Robbins, W4PA
> >Amateur Radio Product Manager
> >
> >
> >
> >
> >-----------------------------------------------------------------
> >Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
> > Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
> > Repair (865) 428-0364 8-4. Sales (800) 833-7373 9 am-5:30 pm.
> > Fax (865) 428-4483 24 hrs. Visit us at <http://www.tentec.com>
> >
> > --->--->---> Please note: E-mail <sales@tentec.com> for sales
> > and general product info only. We presently do not offer
> > repair, parts, or kit building tech support by electronic mail,
> > please telephone (865) 428-0364 or (865) 453-7172.
> >
> > Ten-Tec manufactures amateur radio equipment, military and com-
> > mercial use HF radio equipment, custom aluminum and steel
> > enclosures and has an on-premises, fully equipped tool and die
> > facility supplying metal and plastic injection mold industries.
> > Potential tool and die, custom enclosure or communications
> > electronics customer? Contact us with your needs.
> >
> >
> >
> >--
> >FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> >Submissions: tentec@contesting.com
> >Administrative requests: tentec-REQUEST@contesting.com
> >Problems: owner-tentec@contesting.com
> >Search: http://www.contesting.com/km9p/search.htm
> >
>
> -----------------------------------------------------------------
> Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
> Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
> Repair (865) 428-0364 8-4. Sales (800) 833-7373 9 am-5:30 pm.
> Fax (865) 428-4483 24 hrs. Visit us at <http://www.tentec.com>
>
> --->--->---> Please note: E-mail <sales@tentec.com> for sales
> and general product info only. We presently do not offer
> repair, parts, or kit building tech support by electronic mail,
> please telephone (865) 428-0364 or (865) 453-7172.
>
> Ten-Tec manufactures amateur radio equipment, military and com-
> mercial use HF radio equipment, custom aluminum and steel
> enclosures and has an on-premises, fully equipped tool and die
> facility supplying metal and plastic injection mold industries.
> Potential tool and die, custom enclosure or communications
> electronics customer? Contact us with your needs.
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|