Carl Moreschi
919-494-2363
Franklinton, North Carolina
carlmoreschi@worldnet.att.net
----------
> From: Carl Moreschi <CarlMoreschi@worldnet.att.net>
> To: tentec <tentec@contesting.com>
> Subject: Anyone tried upgrading OMNI V Firmware? N4PY
To: <tentec@contesting.com>
> Date: Saturday, December 11, 1999 1:53 PM
>
> I upgraded my OMNI V firmware about 4 years ago. I made the serial
> port fully CIV compliant. I added band registers and direct frequency
> entry. The main problem with doing this was to get the microprocessor
> chip in an EPROM version. I bought mine about 4 years ago for $80
> and I don't know how much they are now.
>
> The chip is a "MC69HC705C8CS" by Motorola.
>
> The CIV interface also requires a hardware mod on the main board.
>
> I call my OMNI V an OMNI V.9 (almost an OMNI VI).
>
> Anyone that's wants to upgrade can but the chip and send it to me.
> I'll be glad to write my firmware to it.
>
>
>
> Carl Moreschi N4PY
> Franklinton, North Carolina
> carlmoreschi@worldnet.att.net
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|