Dale:
Pin 2 is grounded on the Pegasus mic jack. It's the threaded portion of the mic
jack body that is isolated. On the modified D-104 stand I am using the cable
shield
connected to the mic plug body for the ground return of the PTT. With the mic
jack
isolated the PTT is not functional. I did discuss this with Tentec and they had
no
objection to grounding the jack on the panel. In the process, I will also review
the mic stand wiring scheme.
73 de Greg, K7KJ
Dale L. Martin wrote:
> Lacking a schematic for the Pegasus, I wonder if it wouldn't be prudent to
> discuss the grounding of the pin 2 with Ten-Tec first.? From previous posts,
> my
> understanding is that the speaker audio output jack ground is floating also.
> There may be some problems generated as a result of grounding pin 2 to
> chassis.
?
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|