TenTec
[Top] [All Lists]

[TenTec] Omni VI and Heil mike

To: <tentec@contesting.com>
Subject: [TenTec] Omni VI and Heil mike
From: n1eu@yahoo.com (N1EU)
Date: Sat, 20 Nov 1999 14:32:11 -0800 (PST)
Would like to hear from anyone who has tried Troy's
mod and whether it allowed their Heil HC5 to do the
VOX thing afterwards  ;-)  

FWIW, I'd probably hold off with that C50 change
though . . .

Tnx & 73,
Barry  N1EU


From: TROY WIDEMAN <tlwideman@eee.org>
Subject: [TenTec] T-T's Mod for the mike preamp
To: <tentec@contesting.com>
Date: Wednesday, October 15, 1997 15:45 PM

I installed the mod reported by Rick, N9THC, in the
mike
preamp on my Omni VI. It was very similar to one I had
already devised but I decided to install a more
"official"
change. The mod (change R55  from a 330k to a 470k and
R54
from a 47k to a 22k) does increase the gain needed by
the
Heil cartridges. The approach I used was to just shunt
R54
with a 39k and insert a 139k in series with R55. An
additional mod I added was to shunt C50 (.1 ufd) with
a
10ufd capacitor. My voice is quite low and, by doing
this,
the preamp accommodates my voice characteristics.
         73, Troy, W6HV


--- vbbond@ix.netcom.com wrote:
> 
> N1EU wrote:
> > 
> > I don't think anyone ever disputed that the Heil
> HC5
> > sounds great on the Omni 6.  It just don't want to
> do
> > VOX - that was the main issue.
> 
> > --- Brian J Keegan <brimail@home.com> wrote:
>  My wife (and I, the few times I work SSB) has been
> > > using a Heil Proset 5 on
> > > our Omni VI Plus with no problems whatsoever. We
> are
> > > both constantly told we
> > > have great audio.
> 
> My experience has been the same: the Heil Proset
> with HC5 sounds good, 
> but it's output is insufficient to comfortably and
> smoothly drive the 
> vox circuit. I ultimately went with the TT705 desk
> mic which has plenty 
> of output to easily drive the vox circuit while
> garnering good audio 
> quality reports from others.
> 
>                                      Vince/K7NA
> 
> --

__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>