Could be in the audio amp since the meter is driven it. By "hear nothing" do
you mean no hiss when you crank up the volume? There's scads of things that
could be wrong JIm but the fact that it transmitts correctly eliminates a
lot. I've got one here I've been fixing up so let me know if you need any
paticular information. There are lots and lots of switching diodes that can
cause this too. That rig is one of the few not using a relay but uses diode
switching instead. They are subject to failure by nearby lightning.
Steve N4LQ
----- Original Message -----
From: Jim <kj5tf@madisoncounty.net>
To: <tentec@contesting.com>
Sent: Monday, August 02, 1999 9:13 PM
Subject: [TenTec] Argosy II 525D trouble
>
> My 525D seems to have a problem. I'm not hearing anything on RX, but it is
> transmitting.
>
> I opened it up and dont see anything that jumps out at me. I tapped on the
> VFO case and sometimes there is a thump in the speaker.
>
> I tried plugging my headphones in and hear nothing. And as I tune around
on
> any band I see no meter movement.
>
> Seems, "broke"! Hi Anyone experienced with this rig enuf to make any
> suggestions?
>
> Thanks for any help. 73's de Jim KJ5TF
>
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|