A note to owners of the RX-320.I just started to experiment
with PSK31. I thought I would try to receive some on my
RX-320 first before I tried to transmit any with my Omni-V.
It turns out that the RX-320 is the perfect receiver for this
new mode.Just download the PSK31 software from their
web page.Start the PSK31 software and then start your
Ten-Tec software.The PSK31 software has a good help file
that will give you several tuning tips.There is no need for any
extra audio cables using this setup.Just be sure you have a
cable coming from the line out jack on the RX-320 going to
your sound card.That's all you need.This is the address to their
web site.
(http://www.kender.es/~edu/psk31.html)
Here are some freqs. to try: 1838.150
3580.150
7035.150
10140.150
14070.150
18100.150
21080.150
24920.150
28120.150
73/DX (Omni-V,509,Century22,Scout,RX-320)
Robert/N4USG http://www.angelfire.com/tn/hamradio
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|