Most likely, the grease in the PTO unit has dried up and a rebuild is
inorder. This is quite a project but the information and supplies are
available from TenTec for around $23 or you can send it to them for
repair.
>
> The fine tuning knob on my Omni D does not move the larger tuning dial
> behind it.
> I have to manually turn the larger dial at the same time as I turn the fine
> tuning knob to change the frequency. It seems that some mechanism inside
> the tuning arrangement is not making a good contact. The radio is a loaner
> from a friend, I am not sure what originally caused this problem.
>
> Thanks
>
> Dave - KB9FBG
>
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
>
Steve Ellington N4LQ
N4LQ@IGLOU.COM
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|