TenTec
[Top] [All Lists]

[TenTec] Filter capacity of Omni 6???

To: <tentec@contesting.com>
Subject: [TenTec] Filter capacity of Omni 6???
From: n4lq@iglou.com (Steve Ellington N4LQ)
Date: Sat, 24 Apr 1999 17:51:27 -0400
Now you've got me confused. I thought in the 6,  the 2.4khz filter was
always in-line and you were able to add one more filter in cascade in the
9mhz IF.  Then in the 6+ they allow a choice of one other filter to be
cascaded with the same 2.4khz filter, not 2 at the same time. Then in the
6.3khz if you could add one filter at a time. So it goes like this.

9mhz if: ( 2.4khz, 8 poles fixed)  plus ONE of your choice of 2 optional
filters totaling 16 poles max.

6.3mhz if: your choice of ONE  4 filters thus adding another 8 poles for a
total of 24 poles max.

Am I right or did someone sneak one in on me?

>
>Thanks Yuri for the clarification.  I think I finally
>have it straight (duh).
>
>Could someone confirm my understanding that:
>
>1. The capability of cascading two 9Mhz if filters was
>missing in the original Omni 6, but was added in the
>option 3 upgrade to the Omni 6
>
>2.  An Omni 6 opt 3 has the full filter holding
>capacity of the Omni 6 plus.
>
>
>Thanks & 73,
>Barry   N1EU
>
>--- K3BU@aol.com wrote:
>>
>> In a message dated 4/24/99 7:34:07 AM Eastern
>> Daylight Time, n1eu@yahoo.com
>> writes:
>>
>> <<
>>  Would appreciate clarification of the filter
>> holding
>>  capacity of the Omni 6.  I believe it will hold 3
>>  filters in the 9Mhz and 4 filters in the 6Mhz ifs
>> (or
>>  is that only the plus)? Are all these filter
>> positions
>>  replaceable or is one each of them factory
>>  installed/non-replaceable?  Is there a standard
>>  filter(s) shipped with the rig and, if so, which
>> one
>>  is it? >>
>>
>>
>> Hi Barry,
>> Capacity in OMNI VI+ is one plug in filter 9 MHz,
>> then next stage has two 9
>> MHz plug in spaces (cascaded to the first one) then
>> 4 spaces plug in in 6 MHz
>> IF.
>> Just finished playing with IR filters and it looks
>> like this is only rig on
>> the market that allows 3 filters to be cascaded
>> without elaborate wiring and
>> switching. I am planning to load up either SSB or CW
>> combo, depending which
>> contest is coming.
>> TenTec filters are excellent and cascading makes
>> some sharp skirts.
>>
>> GL
>> Yuri K3BU
>>
>> --
>> FAQ on WWW:
>> http://www.contesting.com/tentecfaq.htm
>> Submissions:              tentec@contesting.com
>> Administrative requests:
>> tentec-REQUEST@contesting.com
>> Problems:
>> owner-tentec@contesting.com
>> Search:
>> http://www.contesting.com/km9p/search.htm
>>
>>
>
>_________________________________________________________
>Do You Yahoo!?
>Get your free @yahoo.com address at http://mail.yahoo.com
>
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>