TenTec
[Top] [All Lists]

[TenTec] Computer control for Omni V?

To: <tentec@contesting.com>
Subject: [TenTec] Computer control for Omni V?
From: patents@dx0man.prestel.co.uk (patents@dx0man.prestel.co.uk)
Date: Thu, 28 Jan 1999 04:37:17 -0000 (GMT)
The short answer is that it doesn't work reliably with any program I
tried.

The longer answer is that it will work up to a point with
HYPERLOG, but the Omni-V interface is not the same as more recent
radios, (Omni-VI etc) which do work with logging programs. There is a
fairly simple program around which gives some control of the Omni-V
via a DOS interface - it might run under Windows (I have not tried
it) but again, I found it was not stable enough. OK, the software was
probably fine, but I have been told that the lack of handshaking on
the Omni-V interface makes controlling the beast at best tricky. I
guess that if you cannot actually control the interface (it seems to
be free-running !) you cannot actually be sure what the status is at
any time when you want to send an instruction to it.

(I'm sure someone can come up with a more scientific explanation that
that).

In the case of HYPERLOG I have been beta testing the Professional
version for some time now. I routinely use it to read the Omni-V
frequency directly into my logbook, but I would not use it in the
heat of a contest to control the rig. Any other supported radio, yes,
but the Omni-V, no. I stress that this is an interface problem
specific to the Omni-V.

If anyone has a better answer then I'm ready willing and able to test
it ! In fact if there is a program around which really does overcome
the problems I have experienced, then I'll go out and buy it.

On 28-Jan-99 radio wrote:
> 
> Is anyone knowledgeable about computer control for the Omni V,
> especially
> any way to get it to work with NA, CT or the like?
> 
> Tnx, Bob
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm

----------------------------------
E-Mail: patents@dx0man.prestel.co.uk
To: <tentec@contesting.com>
Date: 27-Jan-99
Time: 20:49:56
John Crux
Consultant in product forgery - Asia and
Africa

----------------------------------

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>