TenTec
[Top] [All Lists]

[TenTec] Colonel, my reply was rejected (Army Red Tape??)

To: <tentec@contesting.com>
Subject: [TenTec] Colonel, my reply was rejected (Army Red Tape??)
From: N4NT@bnoc.net (N4NT Mike Hyder)
Date: Tue, 14 Jul 1998 12:05:03 -0400
undeliverable to knoxr@cc.tacom.army.mil


Original message follows.

Received: from [204.157.39.94] by bnoc.net
  (SMTPD32-4.0) id A9283D017E; Tue, 14 Jul 1998 11:28:40 -0400
Message-ID: <002401bdaf3c$ecc6ec00$5e279dcc@hyder>
From: "Michael O. Hyder" <N4NT@bigfoot.com>
To: "COL Richard Knox" <knoxr@cc.tacom.army.mil>
Subject: Re: PTO Issue
To: <tentec@contesting.com>
Date: Tue, 14 Jul 1998 11:34:42 -0400
MIME-Version: 1.0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 4.72.3110.1
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.1

Hi, Colonel--

Sorry but I know a lot about the signs of one needing repair (or
re-greasing) since I have four of them in that condition.  So far, I
have been unmotivated to dive into the PTO's and install the kits I have
already purchased.  Seems I just buy another rig and yet another.
Because of this, I do not know anything about the mechanics of the drive
mechanism of those PTO's.

When I began reading your email, I wondered if the setscrew in your knob
was tight, but then you said the shaft was turning.

Cannot help you, but I am sure others on the reflector can!

73 de Mike N4NT@bigfoot.com

-----Original Message-----
From: COL Richard Knox <knoxr@cc.tacom.army.mil>
To: N4NT Mike Hyder <N4NT@bnoc.net>
To: <tentec@contesting.com>
Date: Tuesday, July 14, 1998 10:48 AM
Subject: PTO Issue


> Hi Mike!
>
>    I was just reading your note to Steve and saw your comments on
> the PTO.  Please see if you can help me as it sounds as if you have
> some experience with these.
>
>    I just picked up a mint analog Century 21 with one problem...when
> I turn the tuning dial the shaft turns, but the frequency doesn't
> change, nor are the gears turning on the shaft as I look down on
> them from above.  I called TT and they said it sounded like the PTO
> needed repair, so I ordered the PTO Repair Kit...hasn't arrived yet.
>
>    But from your comments, my PTO doesn't seem to be exhibiting the
> normal indications of needing repair.  Any ideas before I tear it
> open and begin repairs?
>
>    Thanks for any help you can provide!  73!  Dick  KD4BRL

[message truncated]





--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Colonel, my reply was rejected (Army Red Tape??), N4NT Mike Hyder <=