TenTec
[Top] [All Lists]

[TenTec] Scout band module problems -Reply

To: <tentec@contesting.com>
Subject: [TenTec] Scout band module problems -Reply
From: PEPLASTERS@mail.rkd.snds.com (Paul Plasters)
Date: Wed, 10 Jun 1998 13:35:37 -0500
Hi;
Guess I will share a problem I had.  It is a bit embarrassing however!  I
put the Scout in a new mobile bracket, a bit easier to use than the
original, (Not a factory make).  Later I decided to switch to 40 meters.  I
could not get the module to budge.  I really pried on it.
I finally decided I would take the radio out of the car, dis-assemble it, and
find the cause.  It had been in there quite a while, and I was thinking
some thing had arced and welded it self in, or some thing similar.
When I sat it on the bench, giving a little tug to the module it came right
out!  I noticed a little gouge on the left side of the module.  It seems the
screws were a bit too long, and had actually bound it up solid.  Live and
learn!
73 Paul WA9FFL
      o~
  _[-/)_
(_)\/\(=)-ooo...
Paul WA9FFL
Ride to live-Live to ride
"peplasters@rockford.com"
Allergy problems? Athsma?
ask me about an indoor air 
polution control device!



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Scout band module problems -Reply, Paul Plasters <=