Text of message from kr4wm@sccoast.net, 6 Mar 1998, 06:39 AM
>> have to be external to your rig. But, in this case, the amp does QSK
>Hi Duane! Yep, if I had an external keyer, I _could_ use the amp
>QSK- however, my Corsair II has a built-in keyer, and keying
>through the amp would render it useless!
Are you sure? If I recall correctly, the output of the built-in
keyer is to a jack outside. The signal is then routed back into the
rig via a jumper. Thus, it is really an external keyer with the
box inside the rig! Just remove the jumper and use the signal from
the keyer.
tnx es 73 de Conway Yee
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|