I have the Herc II amp in a rack mount configuration. I pulled out the
blank spacer I have below it. It does have a pull down bar to raise up
the front end. Since it's in the rack, I can't pull it down.
I do have a TenTec 238 antenna tuner standing alone. It's the same
height. From the bottom of the feet to the top of the aluminum trim
(normal height), it measures 5.875" (5 7/8'). With the pull down bar in
the down position (maximum height), it measures almost 7.375"
(7 3/8") to the top of the aluminum trim.
The actual measurements are listed as 5.25"H x 12"W x 14.5"D in the
manual.
Hope this helps you out.
73's
Daryl Noel, W4EC
w4ec@juno.com
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|