Hmmmm, verrrrry interesting. My first thought was to reply
and say mine was quiet but then I decided to check it out since
10 meters has been dead since I got my VI.
With the settings as you specify, I have birdies all over the 10 meter
band (every 5 to 10 Hz). Most are S3 to S4 with a ticka ticka sound
within the birdie.
Most of this almost disappears with an antenna connected but you
can still hear them about S0
Wonder what this is? Is it going to be a problem later?
Scott??
Bill W5EC
At 12:52 PM 7/14/97 -0400, you wrote:
>I'm curious what Omni VI owners are receiving at 28.332 with the antenna
>disconnnected from the rig.
>
>Set controls for the following:
>
>PBT centered
>RF GAIN max
>ATTN out
>2.4 filter selected
>NOTCH off
>MAIN ANT selected
>
>Thanks in advance for all replies...
>
><Alan>
>KM4DT
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|