TenTec
[Top] [All Lists]

[TenTec] 1210 transverter spec sheet

To: <tentec@contesting.com>
Subject: [TenTec] 1210 transverter spec sheet
From: sales@tentec.com (Ten-Tec Inc.)
Date: Mon, 19 May 1997 15:23:41 Eastern Daylight Time
     Add 2 meters
     to any HF transceiver. Ideal new use
     for those idle 10 meter mobile rigs.
     Full 10 watts RF output. 
     ALC-controlled 10M input handles
     power range of 4 to 20 watts.
     Solid-state T-R switching.
     Engineered from scratch for optimized
     10M-2M conversion performance. 
     Compact: 1.5"H x 5"W x 8"D.
     
     
     Model 1210 Specifications:
     
** Frequency Coverage:  144-148 MHz band, typically 144-145.7 MHz, based on
28-29.7 MHz tuning
     range of most 10 meter transceivers.  116 MHz local oscillator.
** Power requirement: 12-14VDC, 100 mA. receive, 600 mA in transmit with no
drive, 2.0A on transmit at      10 watts output.  
** Construction:  Black texture painted clamshell-type steel top and bottom,
aluminum panel/chassis and      heatsink.  One 5.5"X3.75" double-sided
circuit board.
**  Semiconductors: 2 IC's, 13 transistors, 25 diodes.  RF final: BLW81.
     
     TRANSMIT:
**     RF Output: 10 watts maximum on CW and FM, 10 watts PEP on SSB.
**     T/R Switching: solid state, RF sensing.
**     Output Power Adjustment Range:  2 to 10 watts.
**     Spurs and Harmonics: Greater than -56 dBc at 10 watts out.
**     Standard TX Hang Time: Approximately 1 second. 
**     Input Drive: Less than 0.5 watts input to key TX mode.  4 watts input
       for 10 watts output.  Input
       drive level is ALC controlled between 4 and 20 watts.  Input SWR less
       than 1.5:1.
     
     RECEIVE:
**     Noise figure: less than 2 dB.   ** Conversion Gain: Approximately 17 dB.
**     Image Rejection: Greater than 60 dB.   **  Input Intercept: -6.5 dBm
       typical.
     
     T-KIT Model 1210 10M-2M Transverter KIT, $139.00.
     Model 1210A Factory Assembled, price to be determined.
Scott Robbins, W4PA
Amateur Radio Sales, Ten-Tec, Inc.

()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()
() Ten-Tec, Inc., 1185 Dolly Parton Pkwy., Sevierville, TN 37862  ()
() Manufacturers of amateur radio equipment, military and         ()
() commercial use HF radio equipment, custom aluminum and steel   ()
() enclosures.  Fully equipped tool and die facility supplying    ()
() the metal and plastic injection mold industries.  Potential    ()
() tool and die, custom enclosure, or communications electronics  ()
() customer?  Contact us.  We do small quantity jobs.  Visit our  ()
() amateur radio sales web page at <http://www.tentec.com>        ()
()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()()


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] 1210 transverter spec sheet, Ten-Tec Inc. <=