I have checked my OMNI-6 and it goes down to the milliwatt stage. (I
suspect the imd goes to pot down there, tho) It actually goes so low,
that I can't measure it with any accuracy. The OMNI-V only went down to
about 10 watts, but the SIX should work with any transverter. de KL7HF
* * * * * * *
Al Scanandoah wrote:
>
> On Wed, 14 May 1997, Warren Walsh wrote:
>
> >
> > My question to the group is, has anyone on the reflector modified their
> > OMNI-VI to provide a low power output for a transverter?
>
> Although this doesn't exactly answer the question, I've had excellent
> results running a transverter with my Omni V by building up an
> attenuator to place between the rig's output and the transverter's
> input, keeping the power out adjustment at minimum. I subsequently
> routed the transverter's IF out to the aux. RX antenna input so I
> wouldn't lose gain there.
>
>
> Al - wa2vez
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|