NZ8J wrote:
>
> I recently bought a Omni 5 and have ben told there are several mods
> available for it, such as "the Ten Tec pin diode mod", and one that
> allows the power to be dropped to almost "zero". I would be interested
> in any and all mods that have been used with success on the Omni 5.
> Thanks
> Tim
> NZ8J
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.html
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: w9tw@contesting.com
> Sponsored by: Akorn Access, Inc & KM9P
A couple of years ago I did a mod on the attenuator to change it from
20 db to a 10 db.(Look at figure 6-7 in your book page 6-11).I changed
the value of R10 from a 470 to a lower value, 330 ohm I think, anyway
just switch resistors until you like it.
--
FAQ on WWW: http://www.contesting.com/tentecfaq.html
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: w9tw@contesting.com
Sponsored by: Akorn Access, Inc & KM9P
|