To the collective experience of the group:
I am having two problems with the built-in keyer in my OMNI VI.
1.) The keyer display, (after hitting "ST" and then "CW") flickers, so I
can't tell what speed is set. I don't just mean flickers between two
values when the knob needs tweaking, I means all the segments on the
LED flicker.
2.) The acutual keyer speed sometimes changes spontaeously by itself
to some odd value, usually very high, around 35-40 wpm.
After speaking with T/T they said to try to tighten everything on the
controller board. I did this and it was fixed for a couple of days,
but now it's back. T/T advised me send the radio back to it's
birthplace for repair, and I will if I have to, but I just wanted to
know if any of you have had this problem and what the fix was.
Anybody out there able to resolve this themselves?
TNX
=======================================
73 de Bob, AA3ON
No Code, No HF....Know Code, Know HF!
|