Ten-Tec's presence on the net has ALREADY proved fruitful!
Scott, KY2P, forwarded me the mod to allow the OMNI V to be cranked down
to about 1 watt while retaining the ability to run 100 watts.
On the 9 MHz IF board:
R46 change from 100 to 10 kohms, then reset R48, the ALC pot.
That's it. Did it last night, my QRPp OMNI V is doing great! Verified 1
watt output on my Oak Hills WM-1.
* Scott Rosenfeld NF3I Burtonsville, MD FM19mc QRV 80-10/6/2/440 *
*** 6m 75 grids worked on 8 watts *** HF 138 cfmd * QRP-L #147 ***
** QRP ARCI #9054 ** DXCC/WAS/WAC *** 100% dipole powered HF/6m **
* 301-549-1022 h / 301-982-1015 w *** 145.490- 147.225+ PL 156.7 *
|