JAMES T BRANNIGAN wrote:
>
> Art,
> On my OMNI VI (about 10 months old) IF/AF Board, C25 is .01 bypass
> from the base of Q4 to ground.
> Is there a C25 bypass on the collector of your Q4?
> Also, the mod re the pass band tuning, did TEN-TEC say what the
> purpose/result of soldering the resistors to the other side foil was?
>
> 73, jim
> WB2TPS
Hi Jim,
You have found a mistake that I made. I misread the schematic where 2
traces cross but no dot indicating a junction. However, I had first
pulled the IF/AF Board and traced the +reg from J44 and I found a .01
cap. I then look at the schematic to see if I could identify it and
I obviously goofed. Now this makes me wonder if I looked at the board
right. I'm too lazy to pull the board again, so if anyone out there
with a fairly new radio has reason to pull this board please let us
all know if the mystery .01 cap is really there. Thanks for the
correction.
73, Art
--
Art Searle, WU2K, NY, ARRL Life Member, QRP-L #524, QRP ARCI #9123
NorCal pending, DXCC MX & CW HR , NRA Benefactor Life Member,
NRA Certified Firearms Instructor, Dale Earnhardt Fan Club
Yosemite Sam "I'm a rootin' tootin' shootin' son of a gun"
|