TRLog
[Top] [All Lists]

Re: [Trlog] latest version that works with icom 765

To: <mjwetzel@comcast.net>, <Trlog@contesting.com>
Subject: Re: [Trlog] latest version that works with icom 765
From: "NE9U - Jasper" <skjasper@att.net>
Date: Fri, 2 Nov 2012 00:26:59 -0500
List-post: <trlog@contesting.com">mailto:trlog@contesting.com>
yes....i use 1200 baud.  hex = 44
these values work in my old version 6.54 but not 6.96 or 7.00
scott ne9u

----- Original Message ----- From: "Mike Wetzel" <mjwetzel@comcast.net>
To: "'NE9U - Jasper'" <skjasper@att.net>; <Trlog@contesting.com>
Sent: Thursday, November 01, 2012 11:53 PM
Subject: RE: [Trlog] latest version that works with icom 765


I can't confirm but I am 98% sure that all versions will work with a 765. I
know I had all versions working with a 781.  Are you sure the baud rate is
set correctly and hex?

Mike W9RE


-----Original Message-----
From: Trlog [mailto:trlog-bounces@contesting.com] On Behalf Of NE9U - Jasper
Sent: November 02, 2012 12:43 AM
To: Trlog@contesting.com
Subject: [Trlog] latest version that works with icom 765

whats the latest version that anyone is using with an icom 765?

I was setting up tonight and was trying both 6.96 and 7.00 which works with
my ft1000, but neither would not  talk to my ic765.
Went way back to 6.54 and all is well with both.

Not sure if there is anything important for SO2R that i will be missing with
an old old version or not.

Anyone know the latest and greatest that will work with both radios?

Thanks!

Scott  NE9U

_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog


_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>