Ed,
I am running Windoz 98, and not starting the GUI.
Mike W9RE
-----Original Message-----
From: Ed Muns [mailto:w0yk@msn.com]
Sent: December 17, 2010 10:19 AM
To: mjwetzel@comcast.net; 'Ed Schuller'
Cc: trlog@contesting.com
Subject: RE: [Trlog] TR 700 issue
Mike, W9RE, wrote:
> Here is my config.sys file that works on my computer with 7.00.
>
> Can't remember much about this computer as it is pretty old.
> It is a Gateway P5-90 upgraded to a 133Mhz. FWIW
>
> DEVICE=C:\WINDOWS\HIMEM.SYS
> DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
> rem device=c:\dos\ramdrive.sys 2048 512 64 /e rem
> device=c:\windows\ramdrive.sys 2048 512 64 /e BUFFERS = 13,0
> DOS=HIGH, UMB
> LASTDRIVE=E:
> rem FCBS=4,0
> DOS=HIGH
> STACKS = 9,256
> FILES = 40
> rem SHELL=C:\DOS\COMMAND.COM C:\DOS\ /E:1024 /p
Now, I'm confused again. "NOEMS" is in your EMM386 statement and 7.00 works
for you ... just the opposite of my experience. Are you using native MS-DOS
6.22 or a DOS window in Windows 98?
I run TR-Log in native MS-DOS 6.22 and starting TR-Log with "NOEMS" in my
EMM386 statement causes the computer to immediately re-boot.
Ed - W0YK
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|