I am running "smartdrive" but no disk cache. "Ramdrive" is presently
commented out in my config.sys.
Using Win98 but not using the GUI to run TR in DOS.
Here is my config.sys file:
DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
rem device=c:\dos\ramdrive.sys 2048 512 64 /a
rem device=c:\windows\ramdrive.sys 2048 512 64 /a
BUFFERS = 40,0
DOS=UMB
rem LASTDRIVE=E
rem FCBS=4,0
DOS=HIGH
STACKS = 18,512
FILES = 40
rem SHELL=C:\DOS\COMMAND.COM C:\DOS\ /E:1024 /p
mem:
Total Used Free
Conventional 640K 19K 621K
Upper 123K 74K 49K
Reserved 384K 384K 0K
Extended (XMS) 39,813K 2,333K 37,488K
Total under 1M 763K 93K 670K
Largest free upper memory block 36K
MS-DOS is resident in upper memory area.
Ramdrive.exe is in the Windows dir.
I took out the rem on " rem device=c:\windows\ramdrive.sys 2048 512 64 /a"
but did not see any improvement. Guessing somehow it's not set up correct.
Any ideas?
Thanks,
Mike W9RE
-----Original Message-----
From: Tree [mailto:tree@kkn.net]
Sent: February 28, 2009 4:16 PM
To: Mike Wetzel
Cc: 'TRLog Reflector'
Subject: Re: [Trlog] CQ160 and version 6.93
On Sat, Feb 28, 2009 at 04:15:06PM -0500, Mike Wetzel wrote:
> Using 6.93 my computer really seems to be a lot slower. After I hit the
> return to log the call things stand still for a second or so and I am not
> able to see if the section is there before I type it in. Anyone else
seeing
> this slowness or is it just me?
Are you using a disk cache?
Tree
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|