Here's what I've got, Josep. Hope it helps you.
I use Serial only for CAT:
Serial 1
RTS = Off
DTR = Off
Baud Rate = 4800
I use Parallel for paddle input, keyer output, and footswitch.
Keyer Radio One Output Port = Parallel 1
Radio One Keyer RTS = Off
Radio One Keyer DTR = Off
LPT Settings:
LPT1 Base Address = 888
Footswitch Port = 1
Paddle Port = 1
Hope this helps.
73,
Dale, kg5u
> -----Original Message-----
> From: trlog-bounces@contesting.com
> [mailto:trlog-bounces@contesting.com] On Behalf Of Josep
> Sent: Monday, November 26, 2007 12:32 PM
> To: TRlog@contesting.com
> Subject: [Trlog] TR4W users
>
> Hi all,
>
> I am trying to configure Serial and Parallel ports for TR4W
> use, but when attempting I get an error that push me out of
> the program. I am lost when asked for RTS or DTR, in Radio
> One and Keyer Radio One Output Port. Any help is welcome.
>
> Thanks,
>
> Josep
> EA6BF
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|