Has anyone been able to get TRLog to work with a PCI multi-port serial board
that was not a Byterunner ?
I have a 4-port PCI serial board, and the DOS driver from the manufacturer. The
driver seems to be working - at least it's output says useful things like:
Port 1:E800H, IRQ: 09H, COM3
Port 2:E808H, IRQ: 09H, COM4
Port 3:E810H, IRQ: 09H, COM1
Port 4:E818H, IRQ: 09H, COM2
TR PORT also looks correct - with COM1-COM4 mapped to E800, etc.
TR IOPORT also seems to behave correctly at the E802, E80A, E812 and E81A
addresses.
Other, possibly relevant, information:
- The DOS driver is from Oxford Semiconductors (it's called OXSER.EXE).
- Running under FreeDOS, not MSDOS.
- Same serial board works fine under Win XP with N1MM Logger.
- I have a mult-port PCI parallel port installed with it's DOS driver - works
fine with TRLog.
73,
Steve, N2IC
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|