EXCHANGERADIOS is working fine here with an
IC-781 and IC-765, both radios at 4800 baud.
I did notice something different with 6.83,
but so far it does not appear to be a problem.
Basically, it seems that the CW keying line
on the parallel port must be "initialized"
(for lack of a better word) in some fashion
before it works.
When the program first starts, at least one
of the radios won't key (sometimes both.)
After a few "Alt-R" commands and some paddle
sent dits, both radios start sending CW OK.
All works fine until the next program re-start.
Just wanted to mention this in case someone
else was experiencing this. Again, it does not
seem to be a problem, but it might be confusing
at first.
73
-Kirk K4RO
On Sun, Oct 29, 2006 at 08:04:08PM -0800, Tree wrote:
>
> I have EXCHANGERADIOS and LASTCQFREQ working again - I think.
>
> Please let me know if it works the way it used to for you:
>
> http://www.kkn.net/~tree/TR683.ZIP
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|