On Thu, Feb 23, 2006 at 07:20:47AM +0000, Ville Hiilesmaa wrote:
> The polling is OK for freq but seems to have a problem with mode.
>
> When on SSB mode, polling causes TRlog to jump to CW for about one second or
> so.
> TRlog then returns to SSB by itself and stays there until next polling.
> If we work SSB and log the QSO just when polling goes CW, the QSO is logged
> as a CW QSO!
> This happens even with:
> MODE = SSB
> MULTIPLE MODES = FALSE
> CW ENABLE = FALSE
> in the cfg file.
>
> When we put the radio on CW, TRlog stays on CW permanently without any jumps
> to SSB.
>
> I understand TR simultaneously polls freq and mode.
> Can we tell TR to poll only frequency and no mode?
> Why the jumping problem is on SSB and not on CW?
Set the command:
FILTER SHORT RADIO MESSAGE = TRUE
I think that is the correct syntax - I am writting
this first thing this morning.
--
George Fremin III - K5TR
geoiii@kkn.net
http://www.kkn.net/~k5tr
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|