Syl.
If I understand you correctly, what you want to do is the "exchangeradio"
frequency thing. Where you swap the frequencies between both your radios.
This command works fine in 6.79 but does not work fine (only swaps bands not
frequencies) in 6.78 (at least with Icom radios). Using 6.79 communication
with Icom radios doesn't seem to be as reliable (nonssb, noncw, 1Gh q's are
shown) as with 6.78.
Mike W9RE
-----Original Message-----
From: trlog-bounces@contesting.com [mailto:trlog-bounces@contesting.com]On
Behalf Of VE5ZX
Sent: December 03, 2004 11:24 AM
To: trlog@contesting.com
Subject: [Trlog] Transfer freg
When using TR in SO2R mode and operating in SO1.5R mode is there anyway to
transfer the rx freq from the second rx radio to the first rx/tx radio?
Sylvan Katz - VE5ZX
Saskatoon, SK
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|