Thanks to replies both on and off list I now have a copy of Setcomm
1.1. I can hardly wait to get spots into TR.
I understand that there was a later version which included parallel port
support but that isn't an issue for me.
73, Jim VE7FO
A. Sewell wrote:
Jim,
I found it and was able to download it from
http://www.qsl.net/ut2io/setcomm.exe. I did a quick look and found it
is version 1.1. If you have any problems downloading let me know and
I will email it to you.
73,
Alan N5NA
Jim Smith wrote:
Some time ago NG7M posted a description of a little utility he had
written (setcomm.exe) to make all 8 ports of a byte runner PCI serial
card available to TR running under Win 98.
It was available as setcomm.zip at
ftp://nc7j.qrq.com/trlog/setcomm.zip Unfortunately, that link
doesn't work anymore. I e-mailed Max a couple of weeks ago about it
but, so far, no reply.
Does anyone have a copy of setcomm.zip or setcomm.exe? If so, I'd
sure appreciate it if you would send me a copy as it looks like it
plus a Byterunner card are the answer to my dilemma of not enough
serial ports and no more IRQs available for more serial cards.
73 de Jim Smith VE7FO
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|