Yes, that's true. There is a problem with MS-DOS 6.22 caused by the
graph.tpu module used in many applications compiled under Borland's
Turbo Pascal ver. 6 or 7 if there are timing-critical routines (and
TR-Log USES such routines!). There is a patch but its application is not
very simple, also source code needed. I recommend to use another DOS
than MS-DOS. Good choice is the Caldera (DR) DOS 7.03 or later which is
also free for non-commercial use. I tested also the IBM DOS 2000 with
great success.
73,
Martin, OK1RR
kd4d@comcast.net napsal(a):
Hi BP:
You may want to try installing that version of DOS, and its
support files, on the hard drive rather than 6.22. Let
us know if that also works. I haven't had any trouble on these
machines.
This sounds like it could be a problem with 6.22.
73,
Mark, KD4D
Hi All,
Mark, KD4D, suggested to download Win-98SE boot disk and boot the computer.
I did it a bit different: created bootable diskette on Win-98 machine
(format a: /s) and booted 3.2 GHz computer to it. Then I accessed TR
directory on C: drive and everything works OK. If I access the very same
directory via dual boot and run TR-Log - the runtime error pops up within
few seconds.
Thanks all responded.
73!
bp (wf3j)
_______________________________________________
PVRC mailing list
PVRC@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/pvrc
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|