So I have my Icoms and my interfaces. I hooked it all up, and now I find
some odd and incorrect behavior which I hope some of you TR-Icom Gurus can
straighten me out on quickly. Surely the program works perfectly if only I
knew how to use it, right?
Icom 746 PRO
I have the baud rate in the radio set to 4800 and TRlog set also to 4800.
Then there's this "RADIO ONE RECEIVER ADDRESS" - it says to use "86" for an
IC746PRO, but the IC746PRO has a user-selectable address currently set to
"66h" or something which I don't think is "base 10" (per manual). Anyway I
put
RADIO ONE RECEIVER ADDRESS = 86
When I turn it all on, TRlog's band info is wrong, it says "NONCW" or
something. I turn the knob, and the frequency numbers come up correctly on
the TRlog screen, but even though it says "7048.5" TRlog still says "NONCW".
I stop turning, and the numbers go away. I turn again and the numbers
appear again, tracking correctly. I change bands on the radio, and TRlog
does not change bands. I change bands on TRlog and the radio doesn't track
the bandchange.
Sooooo, I'm wondering what I have done wrong. Any tips? I would like to
get it all working prior to Field Day if possible. Thanks in advance.
Mark, N5OT
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|