Hi George:
There isn't an existing way for this DVK to tell TR Log when it
quits sending. And, TR does know when the DVP quits.
It appears I do understand how this works now. Thanks! The
only thing I can think of right now would be to tell TR Log
how long the messages are, which would be a pain, but I don't
know if that would really work.
Thanks again. GREAT SUPPORT! :-)
73,
Mark, KD4D
> On Mon, Jan 12, 2004 at 08:39:09PM +0000, kd4d@comcast.net wrote:
> > Hi George:
> >
> > To make this clearer, in NAQP, I think I can configure the
> > DVP to allow me to make an S&P QSO on the second radio and
> > continue to CQ on the first radio without saying ANYTHING,
> > using the same keystrokes as CW. (ALT-D, call, return,
> > space, enter exchange, return (I think) and I'm back on
> > the first radio).
>
> Yes - that may be true since I think TR-Log
> knows when the DVP stops transmitting but
> it has been so long that I am not sure.
>
> >
> > I don't see how to do this (yet) with the DVK. The
> > actual box I'm looking at is an external DVK, driven off
> > of the serial port.
>
> You might be able to do this with a DVK provided it
> had a way to tell TR-Log it was finished and also
> TR-Log know how to read this signal from the DVK.
>
> But right now there is no way for a DVK like the W9XT
> device to signal TR-Log that it has finished sending.
>
>
> --
> George Fremin III - K5TR
> geoiii@kkn.net
> http://www.kkn.net/~k5tr
>
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|