I am using DXTelnet running under Win98 to act like a Packet TNC for TR Log
which is running in a window under Win98. The aux comm port is 2 for
DXTelnet and the Packet Port is SERIAL 3 in the TR config file. A null modem
cable connects the two ports on the computer.
I am able to send spots and the receive spots. However, when I use ctl-B to
bring up the packet screen and then type commands, I do not get an echo of
the keystrokes I have made appearing on the TR Log screen. The keystrokes do
appear in DXTelnet and commands are executed properly.
1. Is anyone else using this method to connect to the Internet and send and
receive spots in TR Log?
2. If you are, do you have the same problem with having to key 'blind' ?
If anyone has a suggestion on how to set some parameter or option to allow
me to see what I am typing to the psuedo-TNC as I do it I would appreciate
hearing it. I have a vague memory of full-duplex and half-duplex settings
controlling this in the TNC world many years ago. I have not found how/where
to set such parameters in the set I am using.
Tod, KØTO
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|