On Mon, Nov 17, 2003 at 06:10:52PM -0000, Andy Cook, G4PIQ wrote:
> Tree said
>
> >> Also, I had a good thought about this over the weekend. The next
> release of
> >> the software will NOT change the band/mode based upon the radio
> frequency.
> >> So if you get a bizarre frequency reading, the band will not change
> from what
> >> it was. I think this will remove most of the frustration people are
> having.
>
> Is this tongue in cheek?! If you're really going to implement this
> feature, please make it switchable - I ALWAYS change band / mode on the
> radio and not on the PC and need the software to follow.
Sorry - I wasn't clear enough on this Monday morning. It will not follow
the radio unless the frequency/mode from the radio is in a valid amateur
band.
Essentially, it does this:
IF RadioBand <> NoBand THEN ActiveBand := RadioBand;
So, if the frequency information from the radio adds up to a non-ham band,
it won't change the band from what it was. There is still some chance that
you will get an erroneous reading that will land in a ham band, but that
does not seem to be the failure mode most people are seeing.
Tree
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|