When in SSB mode and using Alt-N, to change frequency, or ALT-V and ALT-B to
change
bands on my FT-847, the rig always switches the freq/band then automatically
changes to
USB. Even if I am in LSB before I enter the command.
Also, when on CW and with narrow filter switched in, ALT-N, -V and -B changes
the freq/band
as planned but automatically switches the rig into the WIDE FILTER mode
This happens with every version of TR-log I've used in the last 3-4 years
(including 6.78a).
I've lived with it so far, but I am wondering if there is a simple fix for
either of these problems?
--
Alan Kaul W6RCL LaCanada, CA 91011
e-mail: w6rcl@amsat.org
http://home.att.net/~alan.kaul/index.html
> Using the latest version of TR 6.78+, I am having the log miss the mode
> occasionally (nonssb or noncw qso). This past weekend just playing around
> in SS, I tried changing the "ICOM COMMAND PAUSE AND ICOM RESPONSE TIMEOUT"
> values. I finally settled on ICOM COMMAND PAUSE = 300 (although manual says
> this is ignored after 6.71) AND ICOM RESPONSE TIMEOUT = 500 and this seemed
> to eliminate the problem. I am using 781's and have had this problem for a
> while although in some versions it seems to be more pronounced. Has anybody
> had any similar experiences or does anyone have any suggestions? Does
> upping these values hamper any other responses?
>
> Mike W9RE
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|