All you need is a null modem cable between the Windows machine and TRLog.
If you don't want to buy one, just wire the two RS-232 plugs with pins 2 and
3 crossed and 5 as the common (assuming here you have 9 pin serial ports).
Use MMTTY in the KAM emulation mode. The major trick is to set your receive
string to <03>E, rather than <03>R. That way the memory keys will work.
The other little thing is that when you see the emulator sign on in the
TRLog RTTY screen, first thing you have to enter is RTTY (the command to put
the thing in RTTY mode). After that it's pretty transparent.
Ken WK6F
-----Original Message-----
From: trlog-bounces@contesting.com
[mailto:trlog-bounces@contesting.com]On Behalf Of ckuter@ix.netcom.com
Sent: Sunday, November 09, 2003 4:09 PM
To: Trlog@contesting.com
Subject: [Trlog] TR Log and MMTTY
About a year ago I saw a description of using MMTTY on a second computer and
TRlog on the main computer. I would like to try this. I need the cabling
setup / pinouts. No one over at the MMTTY group could help.
N9KO
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|