TRLog
[Top] [All Lists]

[Trlog] SO2R - Control-dash on SSB

To: <trlog@contesting.com>
Subject: [Trlog] SO2R - Control-dash on SSB
From: "SM5AJV" <sm5ajv@chello.se>
Date: Thu, 25 Sep 2003 16:31:05 +0200
List-post: <mailto:trlog@contesting.com>
Hi!
I have tried to make the Control-dash function
working on SSB with no success.

First try was setting up
  CQ MEMORY F1 = DVK1
  CQ MEMORY AltF1 = DVK1
and using the Ctrl-dash command.
But since there is no way to tell TRLOG
how long my DVK-messages are TRLOG will
quickly jump back and forth between the
two radios.


The closest I have come is to program
  CQ SSB MEMORY F4 = DVK1SWAPRADIOS
This will make me to do the dualling CQ
trick manually.

I've also tried to set up the Auto-CQ function
with Alt-Q and using a delay of 7 seconds.
But then TRLOG will not send any messages
and not swap rigs.

Any hints of solving this are welcome!

73 de Ingo, SM5AJV / 8S5A





_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>
  • [Trlog] SO2R - Control-dash on SSB, SM5AJV <=