To: | trlog@contesting.com |
---|---|
Subject: | [Trlog] IC751/Piexx/TR - Golden now |
From: | Tony AI9X <ai9x@arrl.net> |
Reply-to: | ai9x@arrl.net |
Date: | Sat, 13 Sep 2003 11:25:42 -0500 |
List-post: | <mailto:trlog@contesting.com> |
All, Thanks for the help with this problem. Also, sorry if I sounded a bit angry when I wrote the original post - it was late and after almost three frustrating hours, I gave up for the night. OK, here's the scoop: Main problem was a COM port wiring mistake on the PC. Since I never used them (and this was a free PC) I didn't have anyway to check them. Turns out they were switched internally. OK now. The PIEXX UX14PX board, for those that don't know, is a board that installs inside the 751 and provides the UX14/CI-V functionality. A nice product that provides both the 1/8" CI-V and a serial connection to the PC. The serial speed is selectable at 9600/4800 where the CI-V is 9600/1200 (as some of you recommended I try). Both the TRLog's serial port speed and the PIEXX need to be set at 4800 - and it works now. Third issue was that once the interface worked, it would give "RADIO ONE COMMUNICATION WARNING" errors when I sent it commands too quickly. Upgrading to version 6.74 and setting LEGACY RADIO IO MODE = TRUE fixed that. Fourth issue was the Sound Blaster DVK was intermittent with all the above. Upgrading to 6.74 fixed everything under DOS 622 and Win95. I was having mixed results will all of this under 6.68, 6.70, 6.72 and 6.73. This is my first run at using computer control, so a new world just opened up. I also have plans to build an interface when my new ICE antenna switches get here to further automate the station. Hopefully now someone else who wants to go this route can find all the information needed. I had a difficult time since the 751/751A is not supported by TRLog anymore and didn't have much to go on. Settings are like this: RADIO ONE CONTROL PORT = SERIAL 1 RADIO ONE ADDRESS = 28 (the original 751 address BTW) RADIO ONE TYPE = IC765 LEGACY RADIO IO MODE = TRUE The RADIO statements have to be entered each contest, but the LEGACY parameter is in the STDCFG.DAT file. 73's Tony, AI9X _______________________________________________ Trlog mailing list Trlog@contesting.com http://lists.contesting.com/mailman/listinfo/trlog |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | RE: [Trlog] Sprint and F8,F9 keys, WK6F |
---|---|
Next by Date: | Re: [Trlog] voice recorders, Dave Hachadorian |
Previous by Thread: | [Trlog] Sprint and F8,F9 keys, WG0M |
Next by Thread: | Re: [Trlog] IC751/Piexx/TR - Golden now, Tree |
Indexes: | [Date] [Thread] [Top] [All Lists] |